Key Features
Overview
Woodpeckers 3D Setup Blocks w/Rack-It – 3D-SUB7 is a precision setup block set for woodworkers who want faster. repeatable machine and tool setups. This is a setup block system designed for setting cutter height. drilling depth. fence position. and material thickness. Model Number: 3D-SUB7.
What makes this set different from a basic spacer block is the 3D layout. Each block gives you one dimension in four different reference positions. which means the same block can do more than one job depending on how you place it against the cutter. fence. table. or workpiece. In real shop use. that saves time and cuts down on measuring mistakes when you are dialing in common setups.
The size spread shown in the set runs from 1/8 inch up to 1/2 inch. covering the dimensions many woodworkers reach for over and over. The photos show these blocks being used to set drilling depth at a drill press. establish rip fence positions at a table saw. and gauge material thickness during planing. That tells you exactly where this product earns its keep: repeatable machine setup. not just bench-top measuring.
The block geometry is the whole point here. Instead of a plain rectangular gauge. these have stepped faces. angled ends. and cutouts that let you register off different surfaces quickly. That makes them more adaptable around blades. bits. fences. and machine tables where a simple square block can be awkward to place. If you do a lot of setup changes in the shop. that added versatility is worth having.
Storage matters with small setup tools. and Woodpeckers includes the Rack-It holder so the set stays organized and visible instead of getting scattered in a drawer. The set is also marked Made in USA. which will matter to buyers who want domestic-made woodworking tools and shop accessories.
This is a smart fit for cabinet shops. furniture builders. trim carpenters working in a well-equipped shop. and serious DIY woodworkers who care about setup accuracy. If your workflow includes repeat cuts. repeat passes. or frequent machine changes. a dedicated setup block set like this is faster and more reliable than stacking scraps or reaching for a tape measure every time.
Set Drilling Depth Without Guesswork
When you need a repeatable drilling depth. a fixed reference is faster than trial-and-error test holes. These blocks let you set the stop to a known dimension right at the machine.
- Shown setting depth at a drill press
- 1/4 inch block demonstrates the four-position reference design
Dial In Rip Fence Positions Faster
Fence setup is one of those jobs where small errors show up fast. Using a setup block gives you a solid physical reference. which is quicker and more consistent than reading and re-reading a scale.
- Shown against a table saw fence for critical positioning
- Useful for repeatable cuts where setup accuracy matters
Check Thickness During Planing
For thickness checks. a setup block is simple and fast. You can compare the workpiece directly to a known size instead of stopping to measure every board with separate tools.
- Shown gauging planed stock thickness
- Handy for repeat passes when chasing a final dimension
Keep the Set Organized and Ready
Good setup tools only help when the full set stays together. The included Rack-It holder gives these blocks a home. so the right size is easy to grab when you are moving from machine to machine.
- Includes a Rack-It storage holder
- Product image shows mounting screws with the rack
What’s in the Box
- (7) Woodpeckers 3D Setup Blocks
- (1) Rack-It storage holder
- Mounting screws for the rack
Key Specifications
| Product Type | 3D setup blocks |
|---|---|
| Piece Count | 7 blocks |
| Size Range | 1/8 in to 1/2 in |
| Storage | Rack-It holder included |
| Measurement Format | One dimension. four reference positions |
| Made In | USA |
Built For
Pro Tip
Keep the Rack-It holder mounted close to the machines you adjust most often. These blocks are fastest when you treat them like go-to setup references for repeat operations instead of occasional measuring tools.
Tool Nut’s Take
Woodpeckers 3D Setup Blocks w/Rack-It – 3D-SUB7 is the kind of shop accessory you buy once and use constantly.
If you care about repeatable setups. this set is a lot more useful than a pile of scrap spacers and a lot faster than sneaking up on every adjustment.
- Who it’s for: Woodworkers. cabinet builders. and serious DIY users who set up saws. routers. planers. and drill presses on a regular basis.
- Why it stands out: The four-reference 3D design makes each block more versatile than a plain gauge block. and the included rack helps keep the whole set ready to use.
- Worth knowing: This is a setup and reference product. not a measuring tool for every dimension in the shop. It shines most when you work in common repeat sizes.
Common Questions
- What kind of product is this? It is a 3D setup block set used to establish repeatable dimensions for machine setup in woodworking.
- What size range does the set cover? The visible set covers common sizes from 1/8 inch through 1/2 inch.
- What machines can it help set up? The product images show use at a drill press. table saw. and during thickness checks when planing.
- Does it include storage? Yes. The set is shown with a Rack-It storage holder and mounting screws.
A versatile choice goods item suitable for everyday use.
